SS Feida material cover
Product Introduction – SS Feeder Material Cover
The SS Feeder Material Cover is a protective component designed for the Samsung SS series feeders used in SMT (Surface Mount Technology) machines. This cover shields the feeder’s material track and tape from dust, debris, and external damage during operation and handling.
Key Features:
Protection: Prevents contamination of the component tape and feeder mechanism, ensuring smooth material feeding.
Durable Material: Made from high-quality plastic or polycarbonate with good impact resistance and transparency.
Easy Installation: Clips or snaps onto the feeder body without requiring tools, allowing quick removal for maintenance.
Compatibility: Designed specifically for Samsung SS series feeders, covering standard widths such as 8mm, 12mm, 16mm, and 24mm.
Lightweight: Adds minimal weight to the feeder, preserving machine speed and accuracy.
Function & Application:
Protects the feeder’s tape and components during machine operation, transportation, and storage.
Helps maintain component integrity by shielding from dust and mechanical interference.
Commonly used as a replacement part during feeder refurbishment or preventive maintenance.
Typical Specifications:
Material: Transparent or semi-transparent plastic/polycarbonate
Color: Clear or light smoke gray
Mounting: Snap-on or clip-on fit to SS feeder body
Compatible with: Samsung SS 8mm, 12mm, 16mm, and 24mm feeders
Related Accessories – SS Feeder Material Cover
1. SS Feeder Body / Frame
The main structure to which the material cover is attached.
2. Tape Guide / Tape Holder
Components that guide and hold the component tape inside the feeder, protected by the cover.
3. Cover Mounting Clips / Fasteners
Small clips or screws used to secure the material cover onto the feeder body.
4. Tape Tension Spring
Spring mechanism ensuring proper tape tension, working underneath the cover.
5. Feeder Front-End Hook Safety Lock
Locking mechanism that secures the feeder in place on the machine rail; often used alongside the material cover.
6. Feeder Cover Gasket / Seal
Rubber or foam seals that may be used to reduce dust ingress between the cover and feeder body.
7. Feeder Label Holder
Accessory to hold identification labels, sometimes integrated near or on the material cover.
Note:
These accessories are designed to work together to ensure smooth, reliable tape feeding and protection in Samsung SS series feeders.
Related Part Numbers – SS Feeder Material Cover
1. J90651501A
SS Feeder Material Cover – Protective cover for the component tape area on Samsung SS feeders.
2. J90651402A
SS Feeder Front Hook Assembly – Front hook mechanism related to the feeder body.
3. J66021016A
Cover Mounting Clip – Clips or fasteners used to secure the material cover onto the feeder.
4. J66021015A
Tape Tension Spring – Spring responsible for maintaining tape tension inside the feeder.
5. J90651403A
Feeder Front-End Hook Safety Lock – Locks the feeder securely on the machine rail.
6. J6709043A
SS Feeder Front Plate – Front plate of the feeder body housing the hook and cover.
7. J66021014A
Locking Pin / Rivet – Fasteners for hooks or cover components.
Note:
These part numbers may vary slightly depending on feeder width (8mm, 12mm, 16mm, 24mm) or model revision. Confirm compatibility before ordering.
FAQ Guide – SS Feeder Material Cover
1. What is the function of the SS Feeder Material Cover?
The material cover protects the component tape and feeder mechanism from dust, debris, and mechanical damage during SMT machine operation.
2. Which Samsung feeder models is this cover compatible with?
It is compatible with Samsung SS series feeders including common widths like 8mm, 12mm, 16mm, and 24mm.
3. What material is the cover made from?
Typically made from transparent or semi-transparent plastic or polycarbonate, providing durability and visibility.
4. How is the material cover installed?
It clips or snaps onto the feeder body without the need for tools, allowing easy removal for maintenance or tape replacement.
5. What are signs that the cover needs replacement?
Cracks or physical damage
Loose fit causing rattling or poor protection
Reduced visibility of tape path due to discoloration or scratches
6. Can I use third-party covers?
OEM covers are recommended to ensure proper fit and protection, though some third-party covers may be compatible if specifications match.
7. Is the material cover included with new feeders?
Yes, new Samsung SS feeders usually come with the material cover installed.
8. How often should the cover be inspected or cleaned?
Regularly during routine maintenance to ensure no debris buildup and to maintain visibility of the tape path.
9. Where can I get genuine replacement covers?
From authorized Samsung SMT parts distributors or service centers, using part number J90651501A or compatible references.
10. Who can assist with installation or troubleshooting?
Qualified SMT maintenance personnel or Samsung service technicians can provide support.
Physical warehouse,
fast delivery
after-sales support
providing door-to-door transportation services
price advantages,
offering a full range of SMT dip equipment and accessories
We can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT
Contact:
CNSMT Electronics Equipment Co,.LTD
Email: info@smtlinemachine.com
www.smtlinemachine.com
Mb/whatsapp/wechat:+8613537875415
SKYPE:smtdwx
|
|
SS Feida material cover Images
|
